Advertisement
1 Introduction
Assign personnel for site
preparation tasks
The site preparation tasks listed in the following table can be divided between two or
three people from the customer.
It is recommended that the same people assist the GE service personnel during the in-
stallation process later on.
Personnel
Site preparation/
installation
coordinator
Laboratory personnel/
Primary users
Facilities personnel
4
Site preparation tasks
Review the site preparation guide for safety information and system re-
•
quirements.
Choose the site.
•
Coordinate personnel and tasks.
•
Coordinate the installation timing of the system with any domestic safety
•
procedures and testings.
Order required materials.
•
Schedule the installation and inform personnel of the installation date.
•
Review the safety information.
•
Make sure that all customer-provided materials for the installation are
•
present at the site.
Make sure that the installation requirements are met for:
•
Space at the installation site
-
Environmental conditions
-
Biosafety
-
Ventilation and waste collection
-
Electrical supply
-
Safety and installation materials
-
ÄKTAcrossflow Site Preparation Guide 29-1396-59 AA
Advertisement
