Advertisement
1
Introduction
Purpose of this document
The purpose of this document is to give the information you need to fully prepare your
site for the installation and testing of the system.
A Site preparation checklist is included in this document.
You must return this checklist to GE before GE Service personnel can install and test the
system.
Scope of this document
This Site Preparation Guide covers the ÄKTAcrossflow system.
The ÄKTAcrossflow system consists of the following components:
•
•
•
Feedback to GE
Make sure to read the entire Site Preparation Guide and complete the Site preparation
checklist in Chapter 3.
Return the completed Site preparation checklist to the GE service office in your region.
You will find E-mail address and fax number to the GE service office in your region under:
www.gelifesciences.com/contact .
If your region is not listed, select the nearest region.
ÄKTAcrossflow Site Preparation Guide 29-1396-59 AA
WARNING
The product must be installed and prepared by GE personnel or a
third party authorized by GE.
ÄKTAcrossflow system separation unit
Computer including a flat-screen monitor
UNICORN™ control system
1 Introduction
3
Advertisement
