Wall Mounting - Martin Audio CDD-LIVE! Series User Manual

CDD‐LIVE
Wall Mounting
CDD‐Live 8 and CDD‐Live 12 may be wall mounted either in portrait or landscape modes using the same wall brackets introduced
for the CDD installation range. The CDD‐Live 8 uses part number CDDWB6/8B and CDD‐Live 12 uses part number CDDWB10/12B;‐
Do not forget that it is vital to rotate the driver through 90° when using a CDD‐Live cabinet in landscape mode, please see the
chapter on driver rotation for details on how this is achieved.
Installation is a two part process in common with standard first fix / second fix procedures, installation using both sizes of
brackets is identical, the CDD‐Live 12 bracket is just larger than the CDD‐Live 8 version.
The first step is to separate the two halves of the bracket. The vertical adjustment grub screw needs to be screwed in to allow
the collar section to lift clear of the mounting spigot. First fix is to secure the wall section of the bracket. This is the part with four
mounting holes, a large hole for cable entry and a vertical spigot which is what the cabinet section fits over. Use appropriate wall
fixings suitable for the composition of the wall. These must be of sufficient strength to support the weight of the speaker, 14Kg
for the CDD‐Live 8 and 28Kg for the CDD‐Live 12.
CDD‐LIVE User Guide V1.0
USER GUIDE
57