Specifications - Sony HDRC-4000 Operation Manual

Specifications

General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 1.4 A (max.)
5 °C to 40 °C (41 °F to 104 °F)
Operating temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Mass Approx. 6.8 kg (15 lb)
Input/output connectors
I/O PORT D-Sub 15-pin connector
REMOTE A, B 8-pin multi-connector (2)
LAN 8-pin (1)
Input connectors
AC IN 100 V to 240 V AC (1)
4K INPUT-A, 4K INPUT- BNC type (4+4)
B (3G/HD SDI INPUT) 3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms,
1.485 Gbps/1.4835 Gbps
HD INPUT-A, HD BNC type (1+1)
INPUT-B (3G/HD SDI 3G-SDI: SMPTE ST424/425 Level-A/B,
INPUT) 0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms,
1.485 Gbps/1.4835 Gbps
REFERENCE IN BNC type (1)
HD: SMPTE ST274, tri-level sync, 0.6 Vp-p,
75 ohms
SD: Black burst (NTSC: 0.286 Vp-p, 75 ohms/
PAL: 0.3 Vp-p, 75 ohms)
Output connectors
4K OUT-A, 4K OUT-B BNC type (8+8)
3G-SDI: SMPTE ST424/425 Level-A/B,
(3G/HD SDI OUTPUT)
0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms,
1.485 Gbps/1.4835 Gbps
HD OUT-A MAIN, HD BNC type (1+1)
3G-SDI: SMPTE ST424/425 Level-A/B,
OUT-B MAIN (3G/HD
0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps
SDI OUTPUT)
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms,
1.485 Gbps/1.4835 Gbps
3G-SDI/HD-SDI selectable
HD OUT-A MONITOR, BNC type (1+1)
HD OUT-B MONITOR HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms,
(HD SDI OUTPUT) 1.485 Gbps/1.4835 Gbps
REFERENCE OUT BNC type (1)
HD: SMPTE ST274, tri-level sync, 0.6 Vp-p,
75 ohms
SD: Composite sync, 0.3 Vp-p, 75 ohms
HD SYNC/SD SYNC selectable
Supplied accessories
Number plates (1 set)
Operation Guide (1)
Operation Manual (CD-ROM) (1)
Optional accessories
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
CCA-5-3 (3 m) and CCA-5-10 (10 m) connection cables
Maintenance manual
D-Sub 15-pin plug (male) (1-506-582-11 solder/1-566-355-11 crimp)
Related equipment
RCP-1500 series Remote Control Panel
MSU-1000/1500 Master Setup Unit
CNA-1 Camera Control Network Adaptor
Dimensions
MENU
REF IN
CALL CALL
UNLOCK
RCP/MSU RCP/MSU DISP CANCEL
INPUT INPUT COM ERROR
CH A CH B
POWER FAN STOP
CONFIGURATION
MENU ENTER
MENU LOCK
4K HD HDR 2020 2SI HDR 2020HDR 2020
OFF ON
A
B
IN 4K OUT HD OUT
NETWORK
424 mm (16
482 mm (19 in.)
Design and specifications are subject to change without
notice.
Notes
• Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND
MADE BY USERS OF THIS UNIT OR MADE BY THIRD
PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
32
66 mm
5
(2 / in.)
8
3
/ in.)
4