Specifications - Sony LMT-100 Operating Instructions Manual

Specifications

Playback format
Video JPEG2000, 4096 × 2160 / 24p or 2048 ×
1080 / 24p
Audio 24 bits liner PCM (up to 16 channels)
Output/Input
Output
OUTPUT A/B MDR 68-pin
AUDIO OUTPUT AES/EBU
BNC-type (4), AES3id-2001, 8 channels
D-sub 25-pin (female) (1), AES3-2003, 8
channels (16 channels available when
controlled by a computer with SMS
installed) (For details, see "Pin
assignment.")
Output/input
ETHERNET 100BASE-TX/1000BASE-T, Supports
Auto MDI and MDI-X.
RS-232C 1 D-sub 9-pin (female) (for maintenance)
RS-232C 2 D-sub 9-pin (female) (for maintenance)
SPARE D-sub 15-pin (female) (spare connector)
FIBRE CHANNEL
2 Gbps
Input
Input board slot
When the LKRI-001 is installed: Analog
RGB/component, HDTV (YPbPr),
HDTV (GBR)
When the LKRI-002 is installed: HD-SDI
(4:2:2) (SMPTE-292M)
When the LKRI-003 is installed: HD-SDI
(4:4:4/4:2:2) (SMPTE-292M), DC-
SDI (4:4:4)
General
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
2.1 to 1.1 A
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
35 to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
22
Specifications
Dimensions 424 × 221 × 455 mm (16
inches) (w/h/d) (not including the
projection parts)
Mass Approx. 17.5 kg (38 lb 9 oz)
Supplied accessories
IPM input boards (for SR projector) (2)
PM-Link Cables (1-833-055-11, SONY)
(2)
Angle brackets (2)
Connector cover (1)
Operating Instructions (1)
Installation Manual for Dealers (1)
Operating Instructions (CD-ROM) (1)
Optional accessories
LKRI-001 analog input board
LKRI-002 HD-SDI (4:2:2) input board
LKRI-003 HD-SDI (4:4:4/4:2:2)/DC-
SDI (4:4:4) input board
Recommended accessory
RAID disk driver
Use the products recommended by
Sony. For details on the recommended
products, contact Qualified Sony
Service Personnel.
AC power cord
• For customers in the U.S.A.
Power cord (125 V, 10 A, 2.4 m (7.9
feet) ) (Part No. 1-551-812-3X)
• For customers in the European
countries
Power cord (250 V, 10 A, 2.5 m (8.2
feet) ) (Part No. 1-782-929-1X)
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
3 3
/ × 8 / × 18
4 4