Sony HDRC-4000 Operation Manual page 30

Page name Item
Page No.
<CONFIGURATION STORE
FILE>
F02
LOAD (RECALL)
CLEAR
No.
<FILE CLEAR> ALL SETTINGS
F03
ALL CONFIGURATION
FILES
DIAGNOSIS menu
Page name Item
Page No.
<BOARD STATUS> SY
D01
DVP
SDI
DCP1
DCP2
<ROM VERSION> CAMERA APP
D02
OS
UPDATER
SY
SDI
DEC
DCP1
DCP2
4K-POST
2K-POST
SDP
<SERIAL NO.> MODEL
D03
NO
<IP ADDRESS> IP ADDRESS(CH.A)
D04
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
<LAN STATUS> AUTO NEGOTIATION
D05
CONNECTION SPEED
DUPLEX MODE
LINK CONDITION
<CNS STATUS> CNS MODE
D06
MCS MODE
REMOTE CONTROL NO
MASTER IP ADDRESS
Set value
1 to 62
ENTER to execute
ENTER to execute
Set value
OK, NG
OK, NG
OK, NG
OK, NG
OK, NG
Version and date of main software
OS version, date
Version and date of update
software
V x.xx
V x.xx
V x.xx
V x.xx
V x.xx
V x.xx
V x.xx
V x.xx
Model name
Serial number
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
00:00:00:00:00:00 to
FF:FF:FF:FF:FF:FF
OFF, ON
10M, 100M
HALF, FULL
DOWN, UP
LEGACY, BRIDGE, MCS
CH.A 0 to 96
0.0.0.0 to 255.255.255.255
30
Meaning
Save all HDRC-4000 settings to the internal file
(configuration file) specified by the "No." item.
Load and apply all HDRC-4000 settings from
the internal file (configuration file) specified by
the "No." item.
Clear the internal file (configuration file)
specified by the "No." item.
Number of the configuration file to use
Reset all HDRC-4000 settings to factory default
settings.
Clear all configuration files.
Meaning
Internal board status
Software version information
ROM version of SY PLD
ROM version of SDI PLD
ROM version of DEC PLD
ROM version of DCP1 PLD
ROM version of DCP2 PLD
ROM version of 4K-POST PLD
ROM version of 2K-POST PLD
ROM version of SDP PLD
IP address of the unit (display only)
Subnet mask (display only)
Gateway IP address (display only)
MAC address of the unit (display only)
Auto negotiation setting
Connection speed
Duplex mode setting
LAN connection status
Communications mode setting