Wiring The Avxmtg13Ua Video System - Audiovox AVXMTG13UA Installation Manual

WIRING THE AVXMTG13UA VIDEO SYSTEM

1. Make the connections to the vehicle for the 12 pin wiring harness
(P/N 112-4126).
2. Connect the 2 Pin Power Harness (P/N 112-4129) to vehicle's
electrical system by tapping into an accessory hot line and a good
ground.
3. To connect an external AV source, utilize the 3.5mm to RCA jack
pigtail harness.
4. To utilize the AV output feature, connect the RCA output connectors
on the 12-pin harness to the input of an optional external monitor.
*NOTE: The antenna has been designed for optimal performance. When installing the unit, position the antenna for best reception.
AV output
(112-4129)
5. Verify all system functions before final mounting of the finished
assembly.
A/V Source Definitions:
AV - Signal Harness to the 3 RCA Jack Pigtail is used for AV
input (P/N 112-4143).
DVD - Built in DVD.
USB - USB Input.
CARD - SD Card input.
(112-4126)
Rear of Unit
Headphone
Jack
(112-4143)
14
Optional Relay Box
Antenna for
Wireless FM Mod.
See Antenna Note