SATO WS4 Series Operator's Manual page 83

6 SATO WS4 Printer Utility
If you don't have a static IP address, make sure DHCP is enabled and click
∙
Send.
5. After your printer restarts, click Get to get the IPv4 information of your printer.
If you are using a static IP address, you'll get the same settings as it is in the
previous step; if you are using DHCP, the DHCP server will automatically
populate the IP Address, Subnet Mask and Gateway boxes under Current IPv4.
6. In the Input/Output Port list, click LAN, and click Setting.
7. In the Setting LAN dialog box, do one of the following to configure your IP
Work with SATO WS4 Printer Utility
72