Navigation Pane - SATO WS4 Series Operator's Manual

6 SATO WS4 Printer Utility
Status
CUTTER ERROR
NO PAPER
HEAD OPEN
ERROR
HEAD ERROR
EXCESS HEAD
TEMP
NO PAPER (Last
label has been
issued)
MEMORY WRITE
ERROR
FORMAT ERROR
MEMORY FULL
SAVING
SAVING ERROR
UPDATING
FIRMWARE NOW
BLUETOOTH
ERROR
WIRELESSLAN
ERROR
UPDATING
FIRMWARE ERROR
UNKNOWN

6.2.3 Navigation Pane

The Navigation pane includes four items: Parameter Setting, Download, Tool and
Font. Each item has its own tabs, and each tab has a Send, Get, Add or Delete
button (Some of them only have Send). Send is to send your settings to your
printer; Get is to get the current settings of your printer; Add is to add file to the list
Description
The cutter is experiencing issues.
The label has run out.
Attempt to feed or issue the label with the top cover (head)
open.
A broken pin has been found on the thermal head.
The thermal head temperature has become excessively high.
The last label has been issued properly and the label has run
out.
An error has occurred while writing data into the flash ROM
or USB memory.
An erase error has occurred in formatting the flash ROM or
USB memory.
Saving failed because of the insufficient capacity of the flash
ROM or USB memory.
In font or PC command save mode. (to flash ROM or to USB
memory)
The flash ROM or USB memory is being initialized.
An EEPROM for backup cannot be read or written properly.
The printer is updating firmware.
Bluetooth initialization error.
Bluetooth setting parameter error.
WirelessLAN initialization error.
WirelessLAN setting parameter error.
An error occurred during the firmware update.
The status is unknown.
56
Work with SATO WS4 Printer Utility