SATO WS4 Series Operator's Manual page 42

3 Printer Operation
Media Type
Fanfold Media
Looks Like
Fanfold media is in continuous form, but it can
be used as non-continuous media, because its
labels are separated by folds. Some fanfold
media also has black marks or liners.
For fanfold media installation, take the
following steps.
1. Pass the fan-folded media through the
opened window at the rear of the unit.
2.
width of the media holder to match the
media size. After pulling out the media,
pass the media through the media guides
and place the leading edge of the media
on top of the platen roller.
3. Close the top cover.
31
Description
While holding the holder lock, adjust the
Media Types