Other Issues - SATO WS4 Series Operator's Manual

6 SATO WS4 Printer Utility

5.4 Other Issues

There are broken lines in the printed label
The printhead is dirty. Clean the printhead (see Section 4.1.1 "Printhead").
￭
An error occurred when writing data to the USB memory
￭ Did you insert the USB drive?
￭ Make sure the USB drive is plugged securely into the port.
The USB drive might be broken. Replace it with another one. Only up to 16GB
￭
is supported.
The printer is unable to save files due to insufficient USB memory
￭ Delete the files on your USB drive to free some space or replace your USB drive
with an empty one.
The cutter is experiencing issues
If there is a paper jam, clear it.

The cutter has become loose. Fix the cutter in position and tighten it.

The cutter blade is not sharp anymore. Replace your cutter with a new one.

Make sure you use approved media.

The printhead temperature is extremely high
The printhead temperature is controlled by the printer. If it is extremely high
￭
the printer will stop printing automatically until the printhead is cooled down.
After that, the printer will resume printing automatically, if there is any
unfinished print job.
The printhead is broken
Contact your local dealer for assistance.
￭
47
Install SATO WS4 Printer Utility