Play Audio From A Bluetooth Device; Make A Call - Philips CE235BT User Manual

Play audio from a Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports Audio Video Remote Control Profile
(AVRCP) profile, you can control play on the
system.
1
Play a track on the connected device.
2
Press SOURCE repeatedly to switch the
source to [BT AUDIO].
» Play starts automatically.
• To pause or resume play, press
• To skip to the previous or next track,
/
press
Note
•
If the connected device does not support the AVRCP
profile, control play on the connected device.

Make a call

Note
•
Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Redial the last called number
1
When it is not in a call, press .
» [REDIAL] is displayed.
2
Press to start calling.
.
.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
Reject an incoming call
Press and hold
End a call
To end an on-going call, press
Transfer a call to mobile phone
By default, the voice comes from the
loudspeakers during a call.
1
Press and hold until [TRANSFER] is
displayed.
» The loudspeakers are muted, and the
voice comes from your mobile phone
only.
2
Take up your mobile phone for the
conversation.
until [END] is displayed.
.
EN
17