Use Bluetooth Devices; Pair A Device; Play Audio From A Bluetooth Device; Make A Call - Philips CMD310 User Manual

6 Use Bluetooth
devices
With this car audio system, you can listen to
audio from a player or make a call through
Bluetooth.

Pair a device

Note
‡
Philips does not guarantee compatibility with all
Bluetooth devices.
‡
Before pairing a device with this system, read its user
manual for compatibility.
On your device, follow the steps below.
1
Enable it to search other Bluetooth devices.
2
In the device list, select CMD310.
3
Enter the default password "0000".
» If the pairing is successful, [PAIRED] is
displayed.
‡ To disconnect the device, disable the
Bluetooth feature on it.
Play audio from a Bluetooth
device
1
Pair the Bluetooth device with this system.
2
Press repeatedly to switch the source
to [BT AUDIO].
» Play starts automatically.
‡ If play does not start, press
‡ To pause play, press
‡ To skip to the previous or next track,
press /
.
again.
.
Tip
‡
You can also control the play on the Bluetooth device.

Make a call

Note
‡
Keep the Bluetooth connection active between the
system and your mobile.
Call a number
On your mobile, call a number.
» [CALL---] is displayed.
Redial the last called number
1
Press .
» [REDIAL] is displayed.
2
Press WR FRQÀUP
» [CALL---] is displayed.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
Reject an incoming call
Press and hold until [END] is displayed.
End an call
To end an on-going call, press .
Transfer voice to mobile
Press and hold until [TRANSFER] is displayed.
» The loudspeakers are muted, and the
voice comes from your mobile only.
EN 15