Related Manuals for Philips CarStudio CE233/19
Summary of Contents for Philips CarStudio CE233/19
- Page 1 Always there to help you Register your product and get support at www.philips.com/support CE233 Question? Contact Philips User manual...
-
Page 3: Table Of Contents
Contents 1 Safety 9 Additional information Charge your USB device Reset the system 2 Your car audio system Replace the fuse Introduction What's in the box 10 Product information Overview of the system 3 Install the car audio system 11 Troubleshooting Connect wires Mount into the dashboard 12 Notice... -
Page 4: Safety
If damage is caused by failure to follow instructions, the warranty does not apply. Congratulations on your purchase, and welcome to Philips! To fully benefit from the • Modification of the product could result support that Philips offers, register your product in hazardous radiation of EMC or other at www.philips.com/welcome. -
Page 5: What's In The Box
What's in the box Check and identify the contents of the package: a Main unit (with a sleeve) b Carrying case (with front panel included) c Trim plate d Disassembly tool X 2 e User manual... -
Page 6: Overview Of The System
Overview of the system q p o n m l k j i h e AUDIO IN • Unlock the front panel. • Connect to the audio output socket (usually the headphone socket) of an external device. • Return to the previous menu. •... - Page 7 • Start, pause, or resume the play of • In radio mode, press to select the tracks. preset radio station of No. 1. • In radio mode, press to select the • In radio mode, press and hold to store preset radio station of No.
-
Page 8: Install The Car Audio System
3 Install the car u BAND • Press repeatedly to select a tuner band. audio system v MENU • Press to access the system menu. Caution • Insert an SD/SDHC card. • Use the controls only as stated in this user manual. x RESET •... -
Page 9: Connect Wires
Connect the antenna and amplifier as Connect wires illustrated, if applicable. Note • Make sure that all loose leads are insulated with electrical tape. REAR • Consult a professional to connect wires as instructed below. Check the car's wiring carefully and connect them to the the ISO male connectors. - Page 10 Make sure that the car dashboard opening Slide the unit into the sleeve until you hear is within these measurements: a "click". Remove the mounting sleeve with the supplied disassembly tools. Attach the trim plate. Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve.
-
Page 11: Attach The Front Panel
Pull the front panel outwards to remove it. Attach the front panel Insert the notch on the front panel to the chassis on the main unit. Press the left end of the front panel inwards until it is securely locked with a "click". -
Page 12: Get Started
Press to turn on the system. Rotate anti-clockwise to set the hour. » [PHILIPS] is displayed and then Rotate clockwise to set the minute. [SELECT OPERATING REGION] (select a radio region) scrolls. Display the clock... -
Page 13: Mute The Button Beep
5 Listen to radio Mute the button beep The beep sound of buttons is enabled by Switch to radio mode default. Press MENU to access the system menu. Press AS/SOURCE repeatedly to switch repeatedly until [BEEP ON] Press the source to [RADIO]. or [BEEP OFF] is displayed. -
Page 14: Search For A Radio Station
[LOC ON]: Search for radio stations • Press and hold with strong signals only. to store the radio station at the • [LOC OFF]: Search for radio stations selected channel. with strong and weak signals. • To select a stored radio station, press , , or Search for a radio station Play with RDS... - Page 15 Item Program Description Use alternate frequencies type If the signal of an RDS station is poor, enable NEWS News services the AF (Alternate Frequency) function to search AFFAIRS Politics and current for another station that broadcasts the same affairs program. INFO Special information Press MENU to access the system menu.
-
Page 16: Play From A Storage Device
6 Play from a storage device • When a traffic announcement cuts in, you can press to switch the system to the previous mode. This system can play .mp3 files that are copied Synchronize the system clock onto a compatible storage device. You can synchronize the system clock with an RDS station that transmits time signals. -
Page 17: Control Play
Press AS/SOURCE repeatedly to switch Switch tracks the source. • [USB]: For a USB storage device that During play, you can switch tracks or folders is connected to the USB socket on the quickly. front panel [SD/SDHC]: For an SD/SDHC card •... -
Page 18: Listen To An External Player
7 Listen to an 8 Adjust sound external player The following operations are applicable to all supported media. You can use the system to amplify the audio Button Function input from an external player, for example, Rotate to increase or decrease MP3 player. -
Page 19: Additional Information
9 Additional Replace the fuse information If there is no power, check the fuse and replace it if it is damaged. Check the electric connection. Charge your USB device Remove the damaged fuse from the rear panel. You can charge your USB device, for example, Insert a new fuse with the same smart phone, with this product. -
Page 20: Product Information
Power supply 12 V DC (11 V - 16 V), requesting service. If the problem remains negative ground unsolved, go to the Philips Web page Fuse 15 A (www.philips.com/support). When you contact Suitable speaker... -
Page 21: Notice
2016 © Gibson Innovations Limited. All rights Any changes or modifications made to this reserved. device that are not expressly approved by Philips and the Philips’ Shield Emblem are Gibson Innovations may void the user’s registered trademarks of Koninklijke Philips N.V. authority to operate the equipment. - Page 22 2016 © Gibson Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by Gibson Innovations Limited under license CE233_12_19_UM_V3.0 WK1610.1...