Play Audio From A Bluetooth Device; Make A Call - Philips CE135BT User Manual

Play audio from a Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports Audio Video Remote Control Profile
(AVRCP) profile, you can control play on the
system or with its remote control.
1
Play a track on the connected device.
2
Press SOURCE repeatedly to switch the
source to [BT AUDIO].
» Play starts automatically.
• To pause or resume play, press
• To skip to the previous or next track,
press /
Note
•
If the connected device does not support the AVRCP
profile, control play on the connected device.

Make a call

Note
•
Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
EN
14
.
.
Reject an incoming call
Press and hold
End a call
To end an on-going call, press
until [END] is displayed.
.