PAX S90 Setup Manual page 4

Hide thumbs Also See for S90:

Press MENU to access Admin MENU

Press 3 to access SETUP Options

Press 4 FOR CONFIG NFC, enter merchant password, press OK

To enable Contactless Transactions - CLESS choose YES/NO

To enable VISA PAYWAVE choose YES/NO

To enable MasterCard PAYPASS choose YES/NO

To enable Interac FLASH choose YES/NO

PRINTER SET-UP

Press MENU to access the Admin Menu

Press 5 for PRINT SET-UP

Set the NUMBER OF COPIES (choose 2 for merchant and customer copy), press OK Set PAUSE

between copies to YES/NO, press OK

If Pause set to YES, set PRINTER INTERVAL in seconds, press OK

Set PRINT DECLINED RECEIPT to YES/NO (recommended to set to YES)

Set PRINT VOID RECEIPT to YES/NO (recommended to set to YES)

Set PRINT COMPLETION to YES/NO (recommended to set to YES)

Set PRINT FORCED RECEIPT to YES/NO, press OK (recommended to set to YES)

Set RECEIPT FOOTER: Set up to 4 lines of text - 24 characters per line

To access letters on the numeric keypad, press the key quickly until the desired letter appears.

(Press 0 twice for a space, up arrow for the [*] and down arrow twice for the [.])

Set GST #, press OK, Set PST/QST # if required, press OK

Press MENU to access Admin Menu

Press 2 to access REPORT options

Press 1 to print TERMINAL SET-UP conﬁgurations, enter Merchant password, press OK

Press 2 to print SERVER REPORT set-ups. Enter Merchant password, press OK

Press 3 to print BATCH REPORTS. Choose from three diﬀerent batch reports

Press 1 for TRM DETAILS (all transactions details), enter merchant password, press OK

Press 1 for TRM SUMMARY (all transactions by card types), enter merchant password, press OK

Press 1 for HST SUMMARY (all transactions transmitted to host), enter merchant password, press OK

Press 4 to print PRE-AUTHORIZATION (P.A. RPT) report, enter Merchant password, press OK

Press 5 to print EMV PARAMETERS

PAX S90 Set-Up Guide