Electrical Requirements - Haier HEWFT36BXB Installation And User Manual

•
To minimize the risk of rusting, leakage and insulation damage, avoid placing the
wine cellar in a place where heavy moisture is present. Do not directly apply
water onto or into the unit.
•
Your wine cellar is designed for freestanding installation only. It is not designed
for a built-in installation.
RECOMMENDED CLEARANCES
To ensure the wine cellar operates at optimum efficiency, you should install it in a
location where there is proper air circulation and electrical connections.
The recommended clearances around the wine cellar:
4" (10 cm)
2"
(5 cm)
2"
(5 cm)

ELECTRICAL REQUIREMENTS

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
Before you move your wine cellar into its final location, it is important to make sure
you have the proper electrical connection.
Recommended Grounding Method
A 115 volt, AC only 15-amp fused, grounded electrical supply is required. It is
recommended that a separate circuit serving only your beverage center be
provided.
Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
2"
Allow enough space to open
A
(5 cm)
the door 120°
a
WARNING
Electrical Shock Hazard
5