HVF¡ õ ¡ õ ¡ õ AB¡ õ A B C D E FG H A:The abbreviation of “Haier” B:Stands for the “wine” C: The first letter of “Freezer” D:If it is “M”,it stands for “Mechanical thermostat control” ;Or else “0” stands for”macrocomputer control”.
FEATURES Features 1. Optimized for Preservation of Wine Flavors The wine cooler can be set to any temperature you desire to accommodate your wine storage requirements. 2. Temperature adjustable. The wine cooler can be set to any temperature you desire to accommodate your wine storage requirements.
SAFETY PRECAUTIONS Safety Precautions Read all of the instructions before using this appliance. When using this appliance ,always exercise basic safety precautions, including the following: 1. Use this appliance only for its intended purpose as described in this use and care guide. 2.
SAFETY PRECAUTIONS cabinet ,It is designed for freestanding installation only 8. Do not operate your wine cooler in the presence of explosive fumes. 9. Do not store foods in wine cooler as interior temperature may not be cool enough to prevent spoilage. £...
INSTALLATION AND ACCESSORY PARTS INSTALLATION AND ACCESSORY PARTS Unpacking Your Wine Cooler 1.Remove all packaging material, This includes the foam base and all adhesive tape holding the wine cooler accessories inside and outside ,compressor from shipping damage due to vibration and shock. 2.Inspect and remove any remains of packing ,tape or printed materials before powering on the wine cooler.
INSTALLATION AND ACCESSORY PARTS Electrical Requirement Make sure there is a suitable power Outlet(115 volts, 15 amps outlet)with proper grounding to power the wine cooler. Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet ,This is a dangerous practice since it provides no effective grounding for the wine cooler and may result in shock hazard.
INSTALLATION AND ACCESSORY PARTS Mechanical Controlled Units: The control for this is on the back of the unit. There are 6 settings plus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for at least 30 minutes to acclimate itself before making any adjustments.
INSTALLATION AND ACCESSORY PARTS button 3 times will adjust the temperature 3 degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, and so on. Once you have selected the temperature you desire, push the "Light/Set" button. Now the wine cooler is programmed and the LED readout will return to current internal temperature reading ¡...
INSTALLATION AND ACCESSORY PARTS There are 6 settings: 1 being the warmest and 6 being the coolest. You can set the temperature of your wine cooler at any setting you desire. Shelving The shelves are designed for flexibility and easy cleaning. To accommodate different sized bottles the shelves slide out and can be moved up or down into any of the tracks molded into the cooler cabinet.
FUNCTION SCHEDULE Function Schedule for the Electronic Controlled Wine Cooler Function Description white Press the “white wine” button Press the “red wine” button light Press the “light” button The illustration of the function in the subject of “Temperature Adjustments” of “Installation and Accessory Parts”.
MAINTENANCE SERVICE AND TROUBLE SHOOTING Maintenance Service and Trouble Shooting Cleaning and Maintenance Warning: To avoid electric shock always unplug your wine cooler before cleaning, Lgnoring this warning may result in death or injury. Caution: Before using cleaning products, always read and follow manufacture’s instructions and warnings to avoid personal injury or product damage.
MAINTENANCE SERVICE AND TROUBLE SHOOTING Maintenance Service and Trouble Shooting causes, Remove the power cord from AC outlet when a power outage occurs, When power has been restored ,replug power cord to AC outlet. Vacation and Moving Care For ling vacations or absences ,unplug the wine cooler and clean the wine cooler and door gaskets according to “General cleaning “...
MAINTENANCE SERVICE AND TROUBLE SHOOTING Maintenance Service and Trouble Shooting Wine cooler runs too frequently This may be normal to maintain constant temperature during high temperature and humid days. Doors may have been opened frequently or for an extended period of time . Clean condenser coils, Check gasket for proper seal.