Removal And Replacement Procedures Small Form Factor (Sff) Chassis; Serial Number Location; Preparation For Disassembly - HP Compaq Pro 4300 Maintenance And Service Manual

7 Removal and Replacement Procedures
Small Form Factor (SFF) Chassis
Adherence to the procedures and precautions described in this chapter is essential for proper service.
After completing all necessary removal and replacement procedures, run the Diagnostics utility to
verify that all components operate properly.
NOTE: Not all features listed in this guide are available on all computers.

Serial Number Location

Each computer has a unique serial number and product ID number in the location shown below. Keep
these numbers available for use when contacting customer service for assistance.
Figure 7-1

Preparation for Disassembly

See Identifying the Chassis, Routine Care, and Disassembly Preparation on page 24
procedures.
1. Remove/disengage any security devices that prohibit opening the computer
Lock on page
2. Close any open software applications.
48 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Serial Number and Product ID Location
97).
for initial safety
(Installing a Security