HP Compaq Pro 4300 Maintenance And Service Manual page 84
Small form factor business pc
Hide thumbs
Also See for Compaq Pro 4300:
- Maintenance & serice manual (162 pages) ,
- Maintenance and service manual (160 pages) ,
- Specification (57 pages)
Table of Contents
Advertisement
7.
If installing a media card reader, connect the USB cable from the media card reader to the USB
connector on the system board labeled MEDIA1.
Figure 7-34
NOTE:
drive connectors.
8.
Replace the 5.25-inch drive.
9.
Replace the access panel.
10.
If the computer was on a stand, replace the stand.
11.
Reconnect the power cord and turn on the computer.
12.
Lock any security devices that were disengaged when the access panel was removed.
The system automatically recognizes the drive and reconfigures the computer.
76
Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Connecting the Media Card Reader USB Cable
Refer to
System Board Connections on page 53
for an illustration of the system board
Hide quick links:
Advertisement
Table of Contents
