Starting Warm Engine; Stopping Engine - Echo PE-311 Operator's Manual

Power edger
Hide thumbs Also See for PE-311:
Table of Contents

Advertisement

STARTING WARM ENGINE

WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1.
Stop Switch
Move stop switch button (A) away fromthe STOP position.
2.
Recoil Starter
Lay the unit on a flat clear area and pull the recoil starter handle (D)
until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.

STOPPING ENGINE

1.
Throttle Trigger
Release throttle, and allow engine to idle for a minute.
2.
Stop Switch
Move stop switch button backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using trimmer
again.
DANGER
DANGER
P
E
OWER
O
'
M
PERATOR
S
A
D
A
DGER
13
ANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pe-310

Table of Contents