Starting Warm Engine - Echo pe-225 Operator's Manual

Power edger
Hide thumbs Also See for pe-225:
Table of Contents

Advertisement

PE-225

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not hold throttle trigger fully depressed.
The attachment should not move at idle, otherwise serious
personal injury may result.
Note: If attachment moves, readjust carburetor according to
"Carburetor Adjustment" instructions in this manual or see
your ECHO Dealer.
1.
Stop Switch
Move stop switch button (A)
forward away from the STOP
position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible in the "Clear" fuel return
line. Pump bulb an additional 4
or 5 times.
X7732272804
© 03/21 ECHO Incorporated
OPERATION
A
C
23

Advertisement

Table of Contents
loading

Table of Contents