Table of Contents
Advertisement
14
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
1.
Stop Switch
Move stop switch button (A) away from the STOP position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is visible in the "Clear" fuel return
line. Pump bulb an additional 4 or 5 times.
3.
Recoil Starter
Lay the unit on a flat area and pull recoil starter handle/rope (D)
until engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING ENGINE
1.
Throttle Trigger
Release throttle and allow engine to return to idle before shutting
off engine.
2.
Stop Switch
Move stop switch (A) backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using edger
again.
DANGER
A
C
D
A
Advertisement
Table of Contents
