Manual Mode - CITROËN C4 PICASSO Handbook

Hide thumbs Also See for C4 PICASSO:
Table of Contents

Advertisement

Automated mode
F Select position D.
D and the gear engaged are displayed in the 
instrument panel.
The gearbox operates in auto-active 
mode, without any action from the driver. It 
continuously selects the most appropriate gear 
according to the following conditions:
-
optimisation of fuel consumption,
driving style,
-
relief of the road,
vehicle load.
For maximum acceleration, without touching 
the gear selector, press the accelerator fully 
down (kick down). The gearbox changes down 
automatically and maintains the gear selected 
until the maximum engine speed is reached.
When braking, the gearbox changes down 
automatically for more effective engine braking.
When you take your foot off the accelerator 
pedal suddenly, the gearbox does not change 
up, so as to improve safety.
Temporary manual control of the
gears
You can temporarily take control of gear 
changes using the  "+" and "-" steering mounted 
control paddles. If the engine speed allows, the 
instruction to change gear is acted on.
This function allows you to anticipate certain
situations such as overtaking another vehicle or 
approaching a bend.
After a few moments with no action on the
control paddles, the gearbox manages the 
gears automatically again.

Manual mode

F Select position M.
F Use the "+" and "-" steering mounted 
control paddles to change gear.
The gears engaged are displayed successively 
in the instrument panel.
When stationary or at very low speed, the
gearbox automatically engages 1st gear.
In manual mode, it is not necessary to release
the accelerator pedal when changing gear.
The change from one gear to another is only 
effected if the conditions of vehicle speed and
engine speed allow; otherwise the automatic 
laws of operation are imposed temporarily.
If the engine speed is too high or too low, 
the display of the gear selected flashes for a 
few seconds, then the new gear engaged is 
displayed.
Invalid value in manual operation
This symbol is displayed if a gear is 
not engaged correctly (gear selector 
between two positions).
It is possible to change mode at any 
time, by moving the gear selector 
from D to M or the other way round.
Driving
4
143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents