Driving
Switching on
F Turn thumbwheel 1 to the "CRUISE"
position: the cruise control mode is
selected but is paused.
F Press button 2 or 3 : your vehicle's current
speed becomes the cruise speed.
The cruise control is activated (ON).
Pause
You can pause the cruise control at any time
by pressing button 4: the screen confirms the
pause.
158
Modification of the cruise speed
(speed setting)
Once the cruise control is switched on, you
can modify the cruising speed in one of the
following ways:
-
using buttons 2 or 3:
F by successive short presses, to modify
the speed by + or - 1 mph (km/h),
F by a long press, to modify the speed in
steps of + or - 5 mph (km/h),
-
by pressing button 5:
F the six memorised speeds are displayed
in the touch screen tablet,
F choose a value: it is displayed in the
instrument panel.
The selection screen closes after a few
moments.
The modification is then accepted.
-
by pressing button 5, if your vehicle has
speed limit recognition:
F the speed to memorise is displayed in
the instrument panel,
F press button 5 again to save the speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding section.
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the
displayed speed flashes.
The display becomes steady again once the
vehicle returns to the cruise speed setting.
Switching off
F Turn thumbwheel 1 to the "0" position.
The display of information related to the
cruise control disappears.