Third-row seats
Concertina boards
Two rigid concertina boards, which cannot
be separated from the vehicle, cover the
2 third-row seats, when these are in the folded
position.
Each of the two floor panels can
support a load of 100 kg.
Folding the concertina boards
Pull on the control, the 3 sections of the board
will fold like a concertina.
When the third-row seats are upright, these
concertina boards can be left either:
-
flat behind the seats,
-
in the vertical position,
thereby leaving a storage area available.
Ease of use and comfort
Repositioning the
seats
F Remove the luggage net.
For more information on the luggage net
and the Interior fittings, refer to the
corresponding section.
F Return the second-row continuity panels to
their initial position and lock them in place.
F Fold the concertina boards and position
them vertically.
F Pull on the strap F located behind the seat
backrest. The backrest pivots rearwards,
pulling the seat base with it. The seat locks
in the open position.
3
87