Exceeding the programmed
setting
It is possible to exceed the speed setting
temporarily by depressing the accelerator
pedal.
The cruise control no longer manages the
braking system during this period.
Simply release the accelerator pedal to return
to the programmed speed.
If the programmed speed setting is exceeded,
the display of the speed setting disappears
and a message "Cruise control suspended"
is displayed until the accelerator pedal is
released.
Modification of the inter-vehicle distance setting
Three predefined inter-vehicle distance settings
are offered:
-
"Distant" (3 dashes),
-
"Normal" (2 dashes),
-
"Close" (1 dash).
Engine running and cruise control selected
(grey), you can modify the inter-vehicle
distance setting:
F press button 6 to display the selection
screen for inter-vehicle distance,
F press button 6 repeatedly to cycle through
the predefined settings.
The selection screen closes after a few
seconds.
The modification is then taken into account.
This setting remains in memory, whatever the
state of the system and when the ignition is
switched off.
Driving
4
171