Canon g3000 series Online Manual page 471

3. Select network name on screen that appears, and then click Connect.
Select "XXXXXX-GXXXXseries" ("XX" represents alphanumeric characters) as network name.
4. Enter network key on screen that appears, and then click Connect.
By default, the serial number of the machine is used as the network key. Check the serial
number on the back of the machine.
5. Use Setup CD-ROM or follow instructions on Canon website.
Cannot Communicate with Machine Using Access Point Mode
Make sure machine is turned on.
Check1
Is the access point mode disabled?
Check2
Enable the access point mode following the procedure below.
1. Press and hold Wi-Fi button and release it when ON lamp flashes.
2. Press Black button, Color button, and then Wi-Fi button in this order.
The ON lamp changed from flashing to lit and the access point mode is enabled.
Make sure machine is selected as connection for wireless communication
Check3
device (e.g. computer, smartphone, or tablet).
Select the access point name (SSID) specified for the machine as the connection destination for
communication devices.
Have you entered the proper password specified for the access point mode?
Check4
If the security setting of the access point mode is enabled, you need to enter the password to connect your
communication device to the machine.
Make sure machine is not placed too far away from the wireless
Check5
communication device.
Place the wireless communication device and machine where there are no obstacles between them. Wireless
communication between different rooms or floors is generally poor. Wireless communication can be impeded
by building materials containing metal or concrete. If the machine cannot communicate with the computer over
a wireless LAN due to a wall, place the machine and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a
wireless router is nearby, it may cause interference. Place the wireless communication device as far away
from interference sources as possible.
Make sure 5 devices are already connected.
Check6
Access Point Mode does not allow more than 5 devices to be connected.
471