Canon g3000 series Online Manual page 324

Hide thumbs Also See for g3000 series:

Table of Contents

Select the brightness of printed images.

You cannot change the levels of pure white and black. You can change the contrast of the colors

between white and black.

Select from Light, Normal, or Dark, if necessary.

Select this method to adjust the overall density of your print.

To increase the overall intensity, drag the slider to the right. To decrease the overall intensity, drag the

slider to the left.

You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.

The Contrast function changes the differences between light and dark in images during printing.

To make the differences between the light and dark portions of images greater and more distinct,

increase the contrast. On the other hand, to make the differences between the light and dark portions of

images smaller and less distinct, reduce the contrast.

You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.

• When the Grayscale Printing check box is checked for Quality & Media, the color balance (Cyan,

Magenta, Yellow) appear grayed out and are unavailable.

• If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow),

Brightness, Intensity, and Contrast appear grayed out and are unavailable.

Table of Contents

Troubleshooting