Canon g3000 series Online Manual page 467

If using a router, connect machine and computer to LAN side (same network
Check13
segment).
If machine is connected to an AirPort Base Station via LAN, use alphanumeric
Check14
characters for network name (SSID). (Mac OS)
Check machine's TCP/IP setting and disable IPv6.
Check15
To check the current TCP/IP setting, print out the network setting information using the operation panel.
Printing Network Settings
If "TCP/IPv6" is set to "Enable", both IPv4 and IPv6 are enabled.
Press and hold Stop button and release it when Alarm lamp flashes 26 times.
IPv6 is disabled and only IPv4 is enabled.
If the problem is not resolved, redo setup.
• For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
• For Mac OS:
Follow the instructions on the Canon website.
467