Canon g3000 series Online Manual page 130

Note
• When inserting the tank cap, be careful not to twist the tank cap rubber.
9. Close the ink tank cover.
Important
• If you cannot properly close the ink tank cover, check if you forgot to insert any tank caps of the
ink tanks. If the tank cap is left on the tank cap holder, the ink tank cover cannot be closed.
10. Lift the scanning unit / cover once, and then close it gently.
Note
• If the remaining ink level notification function is enabled, the Ink lamp and the Alarm lamp are
lit when ink runs out. This setting is enabled by default.
• If the lamps are lit, perform the following.
• To continue enabling the remaining ink level notification function
Hold down the Black button or the Color button for at least 5 seconds. The Alarm lamp goes
off and the remaining ink level counter is reset.
• To disable the remaining ink level notification function
Press down and immediately release the Black button or the Color button. The Alarm lamp
goes off and the remaining ink level notification function is disabled.
130