Using Card Slot Over Network - Canon g3000 series Online Manual

Using Card Slot over Network

Note
• This function is not available depending on the printer you are using. To make sure whether this
function is available with your printer, refer to
Mounting Card Slot as Network Drive
Restrictions on Card Slot Use over Network
Mounting Card Slot as Network Drive
The card slot must be mounted to use it over a network.
To mount the card slot as the network drive, follow the procedure below.
1. Insert memory card into card slot.
2. Check current printer name.
You can check the current printer name on the LCD of the printer.
3. On Finder, click Go menu and Connect to Server.
4. Input "smb://xxxxxxxxxxxx/canon_memory/" and click Connect.
For example, if the current printer name is "123ABC000000", then input "smb://123ABC000000/
canon_memory/".
5. Make sure card slot is mounted.
When the card slot is mounted, the following icon appears on the desktop or in the Computer window
on the Go menu of Finder.
Note
• The authentication screen may appear. If it appears, you do not need to input the password.
• If you cannot mount the card slot with the method above, input the IP address of the machine
instead of the current printer name, and try again. For example, "smb://192.168.1.1/
canon_memory/". If you mount the card slot with the IP address, you have to remount it
whenever the machine's IP address changes.
Restrictions on Card Slot Use over Network
• You cannot write data to a memory card in the card slot over a network. You can only read data from a
memory card.
List of Function for Each
238
Model.