Canon g3000 series Online Manual page 244

R
• Router
A relay device to connect to another network.
S
• Signal Level
The strength of the signal received by the printer from the wireless router is indicated with a value
from 0 to 100%.
• SSID
Unique label for wireless LAN. It is often represented such as a network name or a wireless router
name.
SSID distinguishes one wireless LAN from another to prevent interference.
The printer and all clients on a wireless LAN must use the same SSID in order to communicate with
each other. The SSID can be up to 32 characters long, and is made up of alphanumeric characters.
The SSID may also be referred to by its network name.
• Stealth
In the stealth mode, a wireless router hides itself by not broadcasting its SSID. The client must specify
the SSID set to the wireless router to detect it.
The stealth mode is called a "closed network".
• Subnet Mask Address
IP address has two components, the network address and the host address. Subnet Mask used to
calculate the Subnet Mask address from the IP address. A Subnet Mask is usually assigned by a
wireless router or a DHCP server of the router automatically.
Example:
IP Address: 192.168.127.123
Subnet Mask: 255.255.255.0
Subnet Mask Address: 192.168.127.0
T
• TCP/IP
Suite of communications protocols used to connect hosts on the Internet or the LAN. This protocol
allows different terminals to communicate with each other.
• TKIP
An encryption protocol employed by WPA/WPA2.
244