Canon g3000 series Online Manual page 357

Changing Machine Setting to Use Wireless LAN
Follow the procedure below to change the machine setting to use wireless LAN.
1. Press and hold Wi-Fi button and release it when ON lamp flashes.
2. Press Color button, Black button and Wi-Fi button in this order.
Make sure the ON lamp changed from flashing to lit and the Wi-Fi lamp is lit.
If the ON lamp has not changed from flashing to lit, go back to step 1.
The wireless LAN is enabled.
Note
• If you do not use the machine with the access point mode or over the wireless LAN:
Follow the procedure below to disable the access point mode and the wireless LAN.
1. Press and hold Wi-Fi button and release it when ON lamp flashes.
2. Press Black button twice and press Wi-Fi button.
Make sure the ON lamp changed from flashing to lit and the Wi-Fi lamp is not lit.
If the ON lamp has not changed from flashing to lit, go back to step 1.
The wireless LAN is disabled.
357