Setup; Camera - Panasonic CJ-HDR216 User Manual

interface.
Important
The window display mode and the channel number are by default. For example, for
the 16-channel, the max window split mode is 16.
3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double
click one channel, system switches to single channel and system uses main stream to
monitor. You can view there are two icons at the left top corner of the channel number for
you reference. M stands for main stream. S stands for sub stream (extra stream).
4) If you login via the WAN mode, system does not support alarm activation to open the
video function in the Alarm setup interface.
Important

For multiple-channel monitor mode, system adopts extra stream to monitor by default.
You cannot modify manually. All channels are trying to synchronize. Please note the
synchronization effect still depends on your network environments.

For bandwidth consideration, system cannot support monitor and playback at the
same time. System auto closes monitor or playback interface when you are searching
setup in the configuration interface. It is to enhance playback speed.

5.8 Setup

5.8.1 Camera

5.8.1.1 Conditions
Here you can view device property information. The setups become valid immediately
after you set. The analog channel is shown as in Figure ‎ 5 -15.
Please refer to the following sheet for detailed information.
Parameter
Channel
Figure
Function
Please select a channel from the dropdown list.
‎
5 -15
135