Panasonic CJ-HDR216 User Manual page 144

Period It divides one day (24 hours) to two periods. You can set
different hue, brightness, and contrast for different periods.
Sharpness It is to adjust monitor video sharpness level. The default value is
50.The bigger the value is, the video image becomes sharper.
Brightness It is to adjust monitor window brightness. The default value is 50.
The larger the number is, the bright the video is. When you input
the value here, the bright section and the dark section of the
video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the
video may become hazy if the value is too high. The value
ranges from 0 to 100.The recommended value ranges from 40
to 60.
Contrast It is to adjust monitor window contrast. The value ranges from 0
to 100. The default value is 50.
The larger the number is, the higher the contrast is. You can use
this function when the whole video bright is OK but the contrast
is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may
lack brightness while the bright section may over exposure .The
recommended value ranges from 40 to 60.
Saturation It is to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50.
The larger the number is, the strong the color is. This value has
no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white
balance is not accurate. Please note the video may not be
attractive if the value is too low. The recommended value ranges
from 40 to 60.
It is to adjust monitor video brightness and darkness level. The
Chroma
default value is 50.
The bigger the value is, the large the contrast between the bright
and dark section is and vice versa.
Color mode It includes several modes such as standard, soft, bright, colorful,
bank. You can select corresponding color mode here, you can
see hue, brightness, and contrast and etc will adjust accordingly.
Image Enhance It is to enhance video quality. The larger the value is, the clearer
the video is. But the noise may become large too.
It is to process the noise of the single image. The video may
2D NR
become soft after process. The larger the value is, the better
the effect is.
3D Denoise It is to process the multiple-frame (at least two frames). It is to
use the frame information between the following two frames to
reduce noise. The larger the value is, the better the effect is.
136