Ptz - Panasonic CJ-HDR216 User Manual

On the top right corner, there are five function buttons. See Figure ‎

1: Zoom: Click this button and then left drag the mouse in the zone to zoom in. right
click mouse system restores original status.

2: Record: When you click local record button, the system begins recording and this
button becomes highlighted. You can go to system folder RecordDownload to view
the recorded file.

3: Screenshot: You can snapshoot important video. All images are memorized in
system client folder PictureDownload (default).

4: Audio :Turn on or off audio.(It has no relationship with system audio setup )

5: Close video.

5.5 PTZ

Before PTZ operation, please make sure you have properly set PTZ protocol. (Please
refer to chapter ‎ 5 .8.5.4).
There are eight direction keys. In the middle of the eight direction keys, there is a 3D
intelligent positioning key.
Click 3D intelligent positioning key, system goes back to the single screen mode. Drag the
mouse in the screen to adjust section size. It can realize PTZ automatically.
Please refer to the following sheet for PTZ setup information.
Parameter Function

Scan



Preset

1
Figure
Select Scan from the dropdown list.
Click Set button, you can set scan left and right limit.
Use direction buttons to move the camera to you desired location
and then click left limit button. Then move the camera again and
then click right limit button to set a right limit.
Select Preset from the dropdown list.
Turn the camera to the corresponding position and Input the
preset value. Click Add button to add a preset.
2 3 4 5
‎
5 -10
5 -10
.
132