Panasonic CJ-HDR216 User Manual page 201


MAC address conflict.

PC or DVR network card is not good.
16. Burn error /USB back error.
There are following possibilities:

Burner and DVR are in the same data cable.

System uses too much CPU resources. Please stop record first and then begin
backup.

Data amount exceeds backup device capacity. It may result in burner error.

Backup device is not compatible.

Backup device is damaged.

Backup device must not have password/encryption protected.
17. Keyboard cannot control DVR.
There are following possibilities:

DVR serial port setup is not correct

Address is not correct

When there are several switchers, power supply is not enough.

Transmission distance is too far.
18. Alarm signal cannot been disarmed.
There are following possibilities:

Alarm setup is not correct.

Alarm output has been open manually.

Input device error or connection is not correct.

Some program versions may have this problem. Please upgrade your system.
19. Alarm function is null.
There are following possibilities:

Alarm setup is not correct.

Alarm cable connection is not correct.

Alarm input signal is not correct.

There are two loops connect to one alarm device.
20. Record storage period is not enough.
There are following possibilities:

Camera quality is too low. Lens is dirty. Camera is installed against the light.
Camera aperture setup is not correct.

HDD capacity is not enough.

HDD is damaged.
21. Cannot playback the downloaded file.
There are following possibilities:
193