Panasonic CJ-HDR216 User Manual page 123


On the navigation bar, click
4.10.5.2.4 Zero-channel
Click zero Channel button, you can go to the following interface. See Figure 4-114. Here
you can enable and set zero-channel encoding function so that you can view several
video sources at one channel.

Enable: This function is disabled by default. Select the checkbox here to enable this
function so that you can control the zero-channel encoding function at the WEB.

Compression: System default setup is H.264. You can set according to device
capability.

Resolution: The resolution value may vary due to different device capabilities. Please
select from the dropdown list.

Frame rate: The frame rate value may vary due to different device capabilities.
Please select from the dropdown list.

Bit Rate: The bit rate value may vary due to different device capabilities and frame
rate setups. Please select from the dropdown list.

Save: Click the Save button to save current setup. If this function is disabled, you
cannot operate zero-channel encoding function at the WEB, the video is black or null
even you operate when the function is disabled. After you enabled this function, login
or to enable/disable tour function.
‎
Figure 4 -113
115