Rear Panel; Cj-Hdr216 - Panasonic CJ-HDR216 User Manual

Name Icon
Shift SHIFT
Record Rec
CDROM

2.2 Rear Panel

2.2.1 CJ-HDR216

The rear panel is shown as below. See Figure ‎
Please refer to the following sheet for detailed information.
SN Icon
1
2 VGA
3 AUDIO IN
4 VIDEO IN
5
6
A
7
B
Function
 In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.
 During tour process, click it to enable/disable tour function.
 Click it to auto adjust resolution when device boots up.
 It is to start/stop record manually.
 In record control interface, working with the direction
buttons to select the record channel.
This button is inapplicable. Please do not press it with too
much force.
Figure ‎ 2 -3
Name Note
Power switch Power on/off button.
VGA video VGA video output port. Output analog video signal. Can
output port connect to the monitor to view analog video output.
Audio input port Connect to audio input device such as speaker.
Video input port Connect to analog camera, video input signal.
Power input port Input 12V DC.
Connect to USB storage device, mouse, burning
USB2.0 port
DVD-ROM and etc.
RS485_A port. It is the cable A. You can connect to the
RS485 （RS-485）
control devices such as speed dome PTZ.
communication
RS485_B.It is the cable B. You can connect to the
port
control devices such as speed dome PTZ.
2 -
3.
9