Add Recording - D-Link DCS-2530L User Manual

Section 3: Configuration
Here you can configure and schedule a regular video recording. After making any changes,
click the Save Settings button to save your changes.
Recording entry Enter a name for the recording.
name:
Enable this Select this to enable this recording.
recording:
Priority: Set the priority for this recording. A recording with a higher priority
will be the one used if two recordings will happen at the same time.
Source: Select the video profile to use as the recording source.
Recording
Use the checkboxes to set which days to record video on. Select
schedule: Always to record for the entire day, or select From and specify the
period of time you want to record using the drop-down menus.
Destination:
Select the Server to save the recording file to. If you created a server
entry for the microSD card slot, you can select SD to save to it.
Total cycling
Specify the amount of disk space to use for this recording (between
recording size:
200 MB and 2 TB). When this space is full, the oldest recordings will
be deleted to make room for new recordings. For example, if each
recording file is 6 MB, and the total cycling recording size is 600 MB,
then the camera will record 100 files in the specified destination. After
that, the oldest file will be deleted to make space for new ones.
Please note that if the amount of free disk space is not enough, the
recording will stop. Before you set up this option, please make sure
your storage drive has enough free space. Also, it is recommended that
you do not save other files in the same folder as your recording files.
D-Link DCS-2530L User Manual

Add Recording

42