D-Link DCS-2530L User Manual page 26

Section 3: Configuration
Enable UPnP Enabling this setting allows your camera to be configured as a UPnP
Presentation: device on your network.
Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries
Forwarding: into the router automatically on a UPnP capable network.
Enable PPPoE: Enable this setting if your network uses PPPoE.
User Name / Enter the username and password for your PPPoE account. Re-enter
Password: your password in the Confirm Password field. You may obtain this
information from your ISP.
HTTP Port: Enter the port to use for HTTP access to the camera. The default port
number is 80.
Access Name for Enter a name to use for HTTP streaming access. The default name is
Stream 1~3: video#.mjpeg, where # is the number of the stream.
HTTPS Port: Enter the port to use for HTTPS access to the camera. You may use a PC
with a secure browser to connect to the HTTPS port of the camera. The
default port number is 443.
RTSP Port: Enter the port number to use for RTSP streaming to mobile devices.
The default port number is 554. You may specify the address of
a particular stream. For instance, live1.sdp can be accessed at
rtsp://x.x.x.x/live1.sdp where the x.x.x.x represents the IP address of
your camera.
Enable CoS: Enabling CoS allows you to specify the Class of Service for different
types of traffic so you can prioritize their transmission on your network.
CoS helps provide prioritization for Layer 2 traffic.
D-Link DCS-2530L User Manual 26