Advanced; Icr And Ir - D-Link DCS-2530L User Manual

Section 3: Configuration
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic: The Day/Night mode is set automatically. You can use the Sensitivity
drop-down box to set when the camera will switch to Night mode.
The text box to the right shows what lighting conditions are currently
being detected by the camera for reference. You can refresh this status
by clicking the Refresh button.
Day Mode: Day mode enables the IR Cut Filter.
Night Mode: Night mode disables the IR Cut Filter.
Schedule Mode: Set up the Day/Night mode using a schedule. The camera will enter
Day mode at the starting time and return to Night mode at the ending
time.
IR Light Control: The camera can enable or disable the IR (infrared) light according to
your preferences. This setting provides additional controls depending on
your specific application.
Off: The IR light will always be off.
On: The IR light will always be on.
Sync with ICR: The IR light will turn on when the ICR filter is disabled (night mode).
Schedule: The IR light will turn on or off according to the schedule that you specify
below.
D-Link DCS-2530L User Manual

Advanced

ICR and IR

45