Event Setup - D-Link DCS-2530L User Manual

Section 3: Configuration
The DCS-2530L has a versatile Event system that lets you configure the camera to perform certain actions when an event occurs. For example,
when motion is detected, you can have snapshots sent to an e-mail address. You can also configure the camera to take regular video recordings
according to a schedule you define.
Before setting up an event, you will need to specify the following:
ƒ Server: This is a destination for media to be sent to, such as an e-mail address.
ƒ Media: This is the media that will be sent, such as snapshots, video clips, or a system log.
You can then set up Events and Recordings:
ƒ Event: This is the actual trigger event that the camera is monitoring for, and the action that it will take. Event triggers include motion
detection, loss of network connection, system reboot, and other events.
ƒ Recording: This lets you set up a schedule for regular video recording.
Event Condition
ex.
Motion detection,
Periodically, System reboot
D-Link DCS-2530L User Manual

Event Setup

Action
Media
(what to send)
ex.
Snapshot, Video Clips
Server
(where to send)
ex.
E-mail
36