D-Link DCS-2530L Technical Support Setup Procedure
Hide thumbs
Also See for DCS-2530L:
- Quick installation manual (77 pages) ,
- User manual (74 pages) ,
- Quick install manual (16 pages)
Advertisement
Quick Links
Technical Support Setup Procedure
How to: Setup always record to SD Card_DCS-2530L?
Step 1: Connect the power of the camera and power on.
Step 2: Open Internet Explorer and enter http://sg.mydlink.com
Step 3: Enter mydlink registered username and password. Click on Sign In.
Step 4: Select DCS-2530L. Click on Settings
Step 5: Click on Advanced Settings.
Page | 1
Advertisement
Related Manuals for D-Link DCS-2530L
Summary of Contents for D-Link DCS-2530L
- Page 1 Step 1: Connect the power of the camera and power on. Step 2: Open Internet Explorer and enter http://sg.mydlink.com Step 3: Enter mydlink registered username and password. Click on Sign In. Step 4: Select DCS-2530L. Click on Settings Step 5: Click on Advanced Settings. Page | 1...
- Page 2 Step 6: Click on Open the Advanced Settings window. Step 7: Copy down the IP address of the DCS-2530L show in the URL bar. Step 8: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
- Page 3 Technical Support Setup Procedure Step 10: Server section Within Event Setup feature, Click Add from Server section as shown. Create a name(eg. SD Storage) and select SD Card in Server Type. Please Save Settings. Page | 3...
- Page 4 Technical Support Setup Procedure Step 11: Media section Within Event Setup feature, Click Add from Media section as shown. Create a name(eg. DCS2530L_Recording) and select Video Clip as shown. Please Save Settings. Page | 4...
- Page 5 Technical Support Setup Procedure Step 12: Recording section Within Event Setup feature, Click Add from Recording section as shown. Create a name(eg. Recording) and Enable Video Recording as shown. Please Save Settings. Page | 5...
- Page 6 Technical Support Setup Procedure Step 13: Ensure that the required entres for Server, Media and Recording sections have been created as shown. --- END --- Page | 6...