SignaMax 065-1753PoE User Manual page 65

Data - General Screen
Access Point Information
Access Point Name
MAC Address
Country/Region
Firmware Version
VLAN
Management VLAN
ID
Current IP Settings
IP Address
Subnet Mask
Default Gateway
DHCP Client
Current Wireless Settings
Access Point Mode
Operation Mode
Channel/Frequency
Security Profiles
Profile Name
SSID
Security
VLAN
Status
62
The current name will be displayed.
The MAC (physical) address of the Wireless Access Point.
The region or domain, as selected on the Basic Wireless
screen.
The version of the firmware currently installed.
The current VLAN status will be displayed.
The current VLAN ID used for management.
The IP Address of the Wireless Access Point.
The Network Mask (Subnet Mask) for the IP Address
above.
The Gateway for the LAN segment to which the Wireless
Access Point is attached (the same value as the PCs on
that LAN segment).
This indicates whether the current IP address was obtained
from a DHCP Server on your network.
It will display "Enabled" or "Disabled".
The current Access Point mode is displayed.
The current operational mode is displayed.
The Channel currently in use is displayed.
The current profile name is displayed.
The current SSID.
This displays the current Security setting.
This displays the current VLAN ID.
The current status of each Wireless Station is displayed.
SIGNAMAX LLC • www.signamax.eu