Setup Procedure
1. Select the desired Wireless Access Point.
2. Click the Set IP Address button.
3. If prompted, enter the user name and password. The default values are admin for
the User Name, and password for the Password.
4. Ensure the IP address, Network Mask, and Gateway are correct for your LAN.
Save any changes.
5. Click the Web Management button to connect to the selected Wireless Access
Point using your Web Browser. If prompted, enter the User Name and Password
again.
6. Configure the following screens, using the on-line help if necessary.
The following section also provides more details about each of these screens.
7. Setup is now complete.
11
SIGNAMAX LLC •
www.signamax.eu