Table of Contents
Advertisement
•
Bridge Mode Support.
Mode, connecting to another Access Point. Both PTP (Point to Point) and PTMP
(Point to Multi-Point) Bridge modes are supported.
And you can even use both Bridge Mode and Access Point Mode simultane-
ously!
•
DHCP Client Support.
namic IP address to PCs and other devices upon request. The Wireless Access
Point can act as a DHCP Client, and obtain an IP address and related information
from your existing DHPC Server.
•
Upgradeable Firmware.
upgraded easily, using only your Web Browser.
•
Simple Configuration.
changed quickly and easily.
•
PoE Support.
Wireless Access Point, so only a single cable connection is required.
Security Features
•
VLAN Support.
different sources to be segmented. Combined with the multiple SSID feature, this
provides a powerful tool to control access to your LAN.
•
WEP support.
128 Bit and 152 Bit keys are all supported.
•
WPA support.
and should be used if possible.
•
WPA2 support.
greater security, using the AES (Advanced Encryption Standard) method of en-
cryption.
•
802.1x Support.
trial-strength wireless security of 802.1x authentication and authorization.
•
Radius Client Support.
Radius Server (as a Radius client).
•
Radius MAC Authentication.
Station MAC addresses by using a Radius Server.
•
Access Control.
Wireless clients to ensure that only trusted Wireless Stations can use the Wireless
Access Point to gain access to your LAN.
•
Password - protected Configuration
provided to prevent unauthorized users from modifying the configuration data and
settings.
Advanced Features
•
Radius Accounting Support.
provide accounting data on Wireless clients.
•
Syslog Support.
send its log data to your Syslog Server.
•
SNMP Support.
allowing you to use a SNMP program to manage the Wireless Access Point.
2
The Wireless Access Point can operate in Bridge
Dynamic Host Configuration Protocol provides a dy-
Firmware is stored in a flash memory and can be
If the default settings are unsuitable, they can be
You can use PoE (Power over Ethernet) to provide power to the
The 802.1Q VLAN standard is supported, allowing traffic from
Support for WEP (Wired Equivalent Privacy) is included. 64 Bit,
Support for WPA is included. WPA is more secure than WEP,
This is a further development of WPA-PSK, and offers even
Support for 802.1x mode is included, providing for the indus-
The Wireless Access Point can login to your existing
You can centralize the checking of Wireless
The Access Control feature can check the MAC address of
If you have a Radius Server, you can use it to
If you have a Syslog Server, the Wireless Access Point can
SNMP (Simple Network Management Protocol) is supported,
. Optional password protection is
SIGNAMAX LLC •
www.signamax.eu
Advertisement
Table of Contents
