Table of Contents
Advertisement
Advanced Wireless Settings
Clicking the Wireless Settings link on the Advanced menu will result in a screen like
the following.
Data - Advanced Wireless Settings Screen
Wireless LAN Parameters
Super-A Mode
Enable WMM Sup-
port
RTS/CTS Threshold
Fragmentation
Beacon Interval
DTIM Interval
37
Figure 25: Advanced Wireless Settings
Check this to enable Super-A mode as required.
Check this to enable WMM (Wi-Fi Multimedia) support in
the Access Point. If WMM is also supported by your
wireless clients, voice and multimedia traffic will be given
a higher priority than other traffic.
Enter the preferred setting between 0 and 2346.
Enter the preferred setting between 256 and 2346.
Enter the preferred setting between 20 and 1000.
Enter the preferred setting between 1 and 255.
SIGNAMAX LLC •
www.signamax.eu
Advertisement
Table of Contents
