Table of Contents
Advertisement
Wireless Settings 11b/g Screen
The settings on this screen must match the settings used by Wireless Stations.
Click Wireless Settings 11b/g on the menu to view a screen like the following.
Data - Wireless Settings 11b/g Screen
Wireless LAN
Turn Radio On
Operating
Mode
Chan-
nel/Frequency
Date Rate
Output Power
19
Figure 11: Wireless Settings 11b/g Screen
Use this checkbox to Enable or Disable this feature as desired.
Select the desired option:
•
Auto (802.11g/802.11b) - this is the default, and will allow
connections by 802.11b and 802.11g wireless stations.
•
802.11b Only - if selected, only 802.11b connections are
allowed. 802.11g wireless stations will only be able to con-
nect if they are fully backward-compatible with the 802.11b
standard.
•
802.11g Only - only 802.11g connections are allowed. If you
only have 802.11g, selecting this option may provide a per-
formance improvement over using the default setting.
If "Auto" is selected, the Wireless Access Point will self-select a
Wireless Channel.
If you experience interference (shown by lost connections and/or
slow data transfers) you may need to experiment with different
channels to see which Channel is the best.
It displays the available transmit data rate of the wireless net-
work.
Select the desired power output. Higher levels will give a greater
range, but are also more likely to cause interference with other
devices.
SIGNAMAX LLC •
www.signamax.eu
Advertisement
Table of Contents
